TOP ALULIT - slévárna hliníku

May 2015

DNV GL Certificate of Approval

In May 2015 the Company received a DNV GL Certificate of Approval of Material Manufacturer that recommends Top Alulit as a supplier of castings for the shipbuilding industry with respect to GL rules and requirements.

March 2015

The DMG NEF 300 lathe

In March 2015 the DMG NEF 300 lathe was put into operation.


February 2015

Additional investment in CNC machining

In February 2015, the Company acquired an additional CNC machining centre - the DOOSAN HP 5100. In our Company machining is implemented on four four-axis horizontal machining centres.

January 2015

Construction of a new production hall

In January 2015, we opened a newly built production hall, to which the workplaces for hammering the sand cores from the castings and the production equipment for finishing and blasting the castings were transferred. This also led to a reduction of dust and noise in the other production areas. The aim was to improve the working environment for our employees and to free-up what was formerly a busy workplace in which we plan to establish our own tool shop for the in-house production of moulds.

The installation of a new melting furnace

In January 2015 a new UVP Brno melting furnace for 600 kg of melt was put into operation. This led to an increase in the melting capacity to 15 tons per day when operating in three shifts.

The acquisition of a new blasting machine

In January 2015 a new suspended blasting machine - the Kovo Staněk TZ 2-7.5/2x 6-12 - was commissioned.

July 2014

The CNC machining centre

In July 2014 our Company purchased another four-axis horizontal machining centre - the DOOSAN HP 5100.


May 2014

The reconstruction of the original building

In May 2014, the reconstruction of the original building was completed. A new office space was built on the second floor, while the former office space was rebuilt and a new reception area was created. The building also received a new exterior appearance.

January 2014

The implementation of two four-axis DOOSAN HP 4000 machining centres

In January 2014 two four-axis DOOSAN HP 4000 machining centres were purchased.


December 2013

The construction of a new production hall

In December 2013 we opened a newly constructed production hall. This hall will serve as a workplace for the production of sand cores, for machining, for final inspections and for shipping.